• Commercial - Retail - Office - Domestic
• Fault finding and testing
• Additional outlets
• Full phone cabling re wiring
• MDF / IDF installation
• MDF Connections click HERE for info
• Naked DSL Connections click HERE for info
• Patch panels
• Telstra NTD's installed Click HERE for info
• ADSL central filters
• Alarm 'Mode 3' sockets and cabling
• Pre-wiring during building or frame stage
• Foxtel pre wiring or cabling
• Telstra Smart Community pre wiring

We only use the highest quality parts, such as ADC Krone and C10, and use high quality Cat5e or higher cable for all telecommunication work. We also use top of the range test equipment from manufacturers such as Fluke Networks and Aegis.

All our technicians are registered, un restricted 'open' telecommunications cabler's and provide a Telecommunications Cabling Advice form (TCA1) on completion guaranteeing all work is done to the related Australian standards.

We are authorized by Telstra to work on and alter, under certain parameters, parts of the Telstra network, this includes before the Network Boundary (1st socket) and work may include Network Boundary or 1st socket re cabling, relocations and or replacements, pre wiring, installation of a NTD and ADSL central filters installed before the network boundary.

At BJR Security our services range from installing one extra outlet in a house, to multi level back bone and tie cabling and distribution frame and patch panel installation with hundreds of outlets throughout.

For commercial, most retail and apartments blocks, Telstras responsibility may be to only connect a new service, or repair a service, to the MDF (Telecommunications Main Distribution Frame) which may be located the other end of the building, another tenant, on another level or even another building, and not connect or repair to the socket or equipment, this is required to be done by a registered cabler, this is were we can help! Click HERE for info.

LINE TESTING If you are experiencing a fault with you line, either noise, occasional drop outs, some outlets not working or slower then expected ADSL speeds, and the telco carrier and or Internet Service Provider are reluctant to help, assuming the cause is cabling and or equipment within your premises, we can help! If a fault is lodged with the carriers (for example Telstra) and a contractor attends to fix the issue and cannot find a fault or the fault is beyond the Network Boundary and is not Telstras responsibility, a call out charge will be issued. We can test the line at the Network Boundary point, and disconnect the carriers lead in cable and test directly, this can provide a clear indication if the fault lies within the cabling and or equipment within your premises, or if its within the carriers network beyond your premises and responsibility. If the fault is caused by cabling or equipment in your premises, we can help identify what is the cause, and if required, re cable or fix the issue. If the fault is not believed to be your premises cabling or equipment, this testing will confirm this and provide you with facts so you can contact the telco carrier or service provider for prompt rectification. In many ADSL cases you may require a ADSL central filter, we can do this also.

SLOW ADSL? Do you have either: 2 or more inline ADSL filters? Monitored alarm system? Poor cabling or modem at the end of a daisy chain of outlets? Then you may require an ADSL Central Filter! We use the C10 100E and the C10 100P ADSL central filters, which are the highest quality ADSL filters suitable for ADSL, ADSL2 and ADSL2+ and we are authorized by Telstra to install these filters, under certain conditions, in there lead in cable, it then filters ALL exciting sockets, we then run a NEW dedicated Cat5e cable from the splitter to a new dedicated socket for the modem, this gives the ADSL modem the best connection possible, bypassing old exciting cabling and avoids multiple in line filters at every socket, helping improve both ADSL speed and line quality! CLICK HERE TO FIND OUT MORE CLICK HERE FOR CURRENT SPECIALS

Building in a Fibre Estate? We are Telstra Velocity experts!

Telstra Velocity provides up to four phone services, broadband internet, Foxtel pay tv and digital free to air tv all via one incoming fibre optic cable.

We can pre wire your house ready for Telstra velocity from the (ONT) Optical Network Termination box Telstra installs on the external wall of your dwelling, to a central 'hub' then to all all phone, data and tv outlets.

• Commercial - Retail - Office - Domestic
• Cat5E, Cat6, Cat6A and Cat7 cabling
• Patch panels
• Rack cabinets
• Pre wiring during building or frame stage
• UPS (Uninterruptible Power Supply) supply and installation
• Network switches - rack mount or stand alone
• ADC Krone Master Installer

We only use the highest quality parts and cable such as Krone, Panduit, Clipsal, IBM and TP Link and we also use top of the range test equipment from manufacturers such as Fluke Networks and Aegis.

At BJR Security we can install a wide range of data cabling infrastructure and structured cabling, ranging from one or two outlets in a house, to thousands in a large office, commercial or data center applications, we can supply and install all cabling, outlets, patch panels, rack cabinets, switches and UPS backup power supply's.

We are a certified ADC Krone Master Installer so you can rest ensured all cabling and equipment is installed correctly to allow maximum performance.

We can integrate in coming phone lines and phone extensions through the patch panels, allowing a simple way of making any outlet throughout the premises to be either data or phone by simply re arranging patch leads, this allows future flexibility in constantly changing office environments.